5 Port 10/100M 802.3af PoE Switch with 4 Port PoE Injector
A 4-Port IEEE 802.3af Power over Ethernet injector hub. Equipped with 4 x 10/100Base-TX POE ports and a single LAN port for connecting to an existing network switch. The 4-Port POE supports full 48VDC power for any remote IEEE 802.3af powered devices, such as Wireless LAN Access Points, Security Cameras, IP phones and LAN Cameras.
**If sending power to a non-POE 12V device, a POE Splitter is required
- IEEE 802.3af power on up to 4 ports
- Supply power to wireless access points and surveillance cameras over Cat-5 cabling
- 5 10/100 Mbps Ports with AutoUplink™
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 53W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 1K entry MAC address table of the PoE Switch POE31004P with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply
Standard&Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Interface: 5*10/100Mbps auto-negotiation ports, port1 to port4 support IEEE802.3 at/af PoE standard
Network Media: 10BASE-TX: UTP category 5, 5e cable (≤250m) 100BASE-TX: UTP category 5, 5e cable (≤150m)
Indicator: 5*Link/Act , 4*PoE Status, 1*Power，1* 100Mbps
Input Power: External Power Supply: DC: 51V/1.25A
Consumption: 2 Watts (max. no PD connected) 63 Watts (max. with 58W PD connected)
Dimension: 100mm*100mm*26mm(L*W*H)
PoE Total Power: 58W
Forwarding Mode: 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port
Backbound Bandwidth: 1Gbps
MAC Address Table: 1K transmission mode Store-And-Forward
Weight: <2kg
Temperature: -10ºC ~ 45ºC
Humidity: 10%－90%RH (non-condensing)
Certification: FCC/CE/RoHS/EAC/BIS/RCM
- 1x 48V 5-Port POE Injector Switch
- 1x 48V Power Supply
